Connecting The Camera - flir C336ZC1 Manual De Instrucciones

4

Connecting the Camera

• It is recommended to connect the camera to your DVR and test the PTZ controls before
permanent installation. For instructions on how to setup PTZ controls, see 6 Controlling
the PTZ Camera with a DVR, page 11.
• When you first power up the camera and connect it to the DVR, it may take up to 2 mi-
nutes for the camera image to appear.
1. Connect the BNC video connector on the camera cable to a single run of
RG59 / RG6 coaxial cable, or to an analog CCTV balun with a single run
of network cable (CAT5e or higher).
The video signal can be extended up to 2300ft (700m) with a single run of RG6 ca-
bling. See 4.1 Extension Cables, page 5 for details on extension cable options.
#LX400046; r. 2.0/22386/22410; en-US
NOTE
NOTE
4