Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.
Take the 300cm 8mm Polyester Line.
Make 2 knots, one right on the end
of the 8mm Polyester line and the
second one 10cm from the end.
This is for a good grip and to make
sure the rope can't disappear in the
cleat leaving 10cm hanging out to
hold and pull it back. Loop this rope
with the knots on the far end through
the 244BLK from the cleat side (as
shown on the picture) around the
roller closest to the fixed attachment
point. Be sure to start at the lower
244BLK so there will be as little
twisting in the rope as possible.
6.
Loop the top 244BLK. Feed the rope from the cleat around the roller on
the far side from the fixed attachment point.
11
Tabla de contenido
