NEILPRYDE X1 Manual De Instrucciones página 7

2. Tie the 5mm line onto the boom arm just aft of the cleat with a clove hitch, and
run the line through the pulley on the Ronstan RF571 block and back through
the cleat.
3. Tie the 4mm line onto the loop on the RF571 pulley block with a bowline and
thread the line through the pulleys on the tail piece and the sail's clew grommet.
Use the top two pulleys for 4:1 advantage with a grommet, or the top and
bottom pulleys for 6:1advantage either with or without a clew fitting.
Clamcleat CL244/CL111 Clove Hitch
Ronstan RF571
Through
6:1 Outhaul
bottom pulley
Ronstan RF571
07