10.4 Disposal of the packaging
The packaging protects the device against damages during transit. The
packaging materials are selected in accordance with environmentally
compatible and recycling-related points of view and can therefore be
recycled.
Returning the packaging back to the material loop saves raw materials and
reduces the quantities of accumulated waste. Take any packaging materials
that are no longer required to "Green Dot" recycling collection points for
disposal.
► If possible, keep the original packaging for the device for the duration of
the guarantee period of the device, in order that the device can be re-
packaged properly in the event of a guarantee claim.
10.5 Setup
10.5.1
Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the
setup location must fulfil the following prerequisites:
• Place your appliance on a floor that is strong enough to support the
appliance when it is fully loaded.
• Locate the appliance away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating
and heat sources may increase electrical consumption.
• Ambient temperature below 0°C or above 38°C will hinder the
performance of the appliance.
• This unit is not designed for use in a garage or any other outside
installation.
• Do not set up the device in a hot, wet or extremely damp environment or
near flammable material.
• Do not cover up any openings on the device and do not block these off.
• The electrical socket must be easily accessible so that the power lead can
be disconnected easily, in the case of an emergency.
• The installation and assembly of this device in non-stationary setup
locations (e.g. on ships) must be carried out by specialist companies /
electricians, provided they guarantee the prerequisites for the safe use of
this device.
• For energy saving reasons please ensure that the door is closed when
the appliance is turned on.
caso Wine Safe 18EB
Please note
34