Orbegozo SF 0247 Manual De Instrucciones página 12

SF 0247
2. Put the rear guard in the front cover of the motor through the axis. Use the guard nut to fasten the
rear guard. (As FIG.2 shown)
3. Put the blade through the front axis of the motor, and then use the blade nut to fasten the blade.(As
fig.3 shown)
Make sure that both the guard nut and the blade nut are secured tightly.
4. Cover with the front guard and use the screw to fasten the front and the rear guard. (As fig.4 shown
12