Specifications; Dimensions - Phonic XP 1000 Manual Del Usuario

SPECIFICATIONS

Stereo Mode (driving both channels)
8Ω 20Hz-20KHz 0.03% THD
4Ω 20Hz-20KHz 0.05% THD
8Ω EIA 1KHz 1% THD
4Ω EIA 1KHz 1% THD
2Ω EIA 1KHz 1% THD
Bridge Mono Mode
8Ω 20Hz-20KHz 0.1% THD
4Ω 1KHz 1% THD
All Models
Input sensitivity @ 8
Input sensitivity @ 4 Ω
Noise (unweighted 20Hz-20KHz below rated
output)
Distortion (SMPTE-IM)
Damping Factor
Output Circuitry
Filtering
Frequency Response
Input Impedance
Cooling
Connectors (each channel)
Indicators
Front panel controls
Amplifier Protection
Gain
Power Consumption
Dimensions (WxHxD)
Weight
4 4
XP 1000
Continuous Average Output Power Per Channel
250W
400W
275W
440W
560W
Continuous Average Output Power
800W
1120W
1.4 Vrms
1.25 Vrms
106 dB
<0.01%
>200 @ 8Ω
High pass filter (30Hz, 50Hz)
20Hz-20KHz, 0/-1dB, -3dB points: 5Hz-100KHz
20 kΩ balanced, 10 kΩ unbalanced
Dual continuous variable-speed fans, front-to-rear air flow
Input: XLR & 1/4" TRS jacks Output: Speakon & binding posts
Power: Amber Phonic logo; Parallel: Green backlight icon;
Bridged: Red backlight icon; CLIP/LIM: Red LED;
PROTECT: Yellow LED Green LED for -10dB, -20dB and -40dB Signal Lights
CH1 & CH2 GAIN knobs with 41 detents
Short circuit, thermal, subsonic, RF protection, Output DC offset, Heatsink and trans-
former over-heat protection, Power on/off muting, Soft start power on
32x (30dB)
293W
482 x 105 x 400mm
(19" x 4" x 15.7")
16.6kg (36.7lbs)
XP 2000
400W
600W
450W
660W
960W
1200W
1920W
1.23 Vrms
107 dB
<0.02%
>500 @ 8Ω
Class H Amplifier
40x (32dB)
880W
482 x 150 x 400mm (19" x 5.9" x 15.7")
20.68kg (45.6lbs)
XP1000 / XP2000 / XP3000
XP 3000
600W
1000W
650W
1100W
1400W
2000W
2800W
1.73 Vrms
1.58 Vrms
1460W
24.2kg (53.3lbs)