Specifications - Phonic MAX 1000 Manual Del Usuario

SPECIFICATIONS

Stereo Mode (driving both channels)
8Ω EIA 1kHz 0.1%THD
4Ω EIA 1kHz 0.1%THD
Bridge Mono Mode
8Ω EIA 1kHz 0.1%THD
Output Circuitry
Input Sensitivity @ 8Ω
Distortion (SMPTE-IM)
Noise (unweighted 20 Hz - 20 kHz below rated
output)
Damping Factor
Frequency Response
Input Impedance
Cooling
Connectors (each channel)
Indicators
Controls
Front Panel
Rear Panel
Protection Circuitry
Power Comsuption
Power Requirement (depends on region)
Dimensions (WxHxD)
Weight
10
Continuous Average Output Power Per Channel
Continuous Average Output Power
Class AB
1.23V (+4dBu)
<0.01%
100dB
>300 @ 8Ω
20 Hz-20KHz, +0/-1dB; -3dB points: 5Hz-50KHz
20 kΩ balanced, 10 kΩ unbalanced
Continuous variable-speed fan, front-to-rear air flow
Input: XLR; Output: Speakon and binding posts
Power: Blue LED; Signal: Green LED; Peak: Red LED
CH1 & CH2 GAIN knobs with 21 detents
Slide switches: Operation mode: Parallel, Bridge, Stereo;
Current-Break reset button
Short circuit, thermal, subsonic, RF protection,
output DC offset, power on/off muting
100~120VAC, 220~240VAC, 50/60Hz
482.6 x 88 x 415 mm (19" x 3.46" x 15.9")
14.6 kg (32.2 lbs)
200W
300W
600W
600W
MAX 1000