Specifications; Product Identification; Engine; Aerator - Jacobsen RYAN GA 24 Manual Tecnico

2

SPECIFICATIONS

2 SPECIFICATIONS
2.1

PRODUCT IDENTIFICATION_________________________________________________

544907 ............................ GA 24 Aerator with OPC, 8 hp
Serial Number ................ An identification plate, like the one
2.2

ENGINE__________________________________________________________________

Make ............................... Briggs & Stratton
Model .............................. Intek Pro OHV
Horsepower .................... 8 hp (6.0 kW) @3600 rpm
Displacement .................. 18.64 cu. In. (305.4 cc)
Bore x Stroke .................. 2.94 x 2.75 in (74.61 x 69.85 mm)
Fuel:
Type .......................... Unleaded Gasoline
Rating ....................... Min. 85 Octane
2.3

AERATOR________________________________________________________________

Spacing ........................... 2 in. (51 mm) on center
Depth of Penetration ....... 3 in. (76 mm) maximum
Standard Tines
Type .......................... Hollow, Tapered
Material ..................... Case Hardened Steel
Quantity .................... Two sets 1/2 in. (13 mm)
Tine Options
Solid .......................... 1/4 in. (6 mm) Quad Tines
Hollow ....................... 1/4 in. (6 mm), 3/8 in. (9 mm), 5/8
Swath Width.................... 24 in. (609 mm)
GB-6
gasoline engine.
shown, listing the serial number, is
attached to the right side frame,
near the engine.
diameter
in. (16 mm)
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
CHARLOTTE, NC
544907
Capacity.................... 2.5 U.S. Gal. (9.5 liters)
Governor......................... Flyweight Mechanical
Lubrication:
Capacity.................... 1 quart (0.95 liters)
Type.......................... SAE 30W
API Classification ..... SG, SH, SJ
Air Filter .......................... Replaceable Dual Element.
Cooling System .............. Air Cooled
®
A Textron Company
MADE IN U.S.A.
1601