Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DioDe teSt
1. Insert RED test lead into VΩ jack
COM jack
4
Continuity/Resistance/Capacitance/Diode-Test
note: The meter defaults to Continuity testing in this mode. Press
the "SELECT" button
The Diode icon
2. Touch test leads to diode. A reading of 200-800mV on display
indicates forward bias, "ol" indicates reverse bias. An open
device will show "ol" in both polarities. A shorted device will
show approximately 0mV.
Black lead
frequency / Duty-cycle
1. Insert RED test lead into VΩ jack
COM jack
Frequency/Duty-Cycle
note: The meter defaults to Frequency testing in this mode. To enter
Duty-Cycle testing mode, press the "SELECT" button
that the appropriate icon (either Hz or % ) appears on the display.
2. Measure by connecting test leads across the circuit.
Black lead
operatinG inStructionS
, and rotate function selector switch
three times to enter Diode testing mode.
12
will appear on the display.
Red lead
, and rotate function selector switch
4
Red lead
, and BLACK test lead into
5
and BLACK test lead into
5
setting.
to the
2
setting.
to the
2
once. Ensure
12
15
Tabla de contenido
