Intended Use - Ivoclar digital PrograPrint PR5 Guía Breve

English
2 Safety
WARNING! Improper use of the device.
Hazard to the user.

The safety chapter contains important information on the safety of the device: Please read
it thoroughly prior to installation and operation.
The device is built according to state-of-the-art technology and recognized safety regulations.
Nevertheless, operation bears the risk of injury for the user or third parties. Moreover,
impairments to the device and other property are possible.
2.1

Intended use

PrograPrint PR5 has been designed for 3D printing in dental technology using the following
materials:
• ProArt Print Wax (burn-out material for the press and casting technique)
• ProArt Print Model (material for the fabrication of the dental working models)
• ProArt Print Splint (material for the fabrication of dental drilling templates and splints)
Use PrograPrint PR5 exclusively for this purpose.
In the case of damage caused by improper use or failure to observe the Operating Instructions,
all liability and guarantee claims are void.
Please note that only the materials and cleaning agents approved by the manufacturer ensure
processing without damage to the machine.
Only approved materials can be identified by the PrograPrint PR5 by means of the
corresponding RFID code on the material bottle and on the cartridge and used accordingly so
that misapplication is virtually impossible.
All information regarding material and indication extensions corresponds to the state of
knowledge at the time of going to print. For additional details, go to http://
www.ivoclarvivadent.com.
The use of materials from other manufacturers is not recommended due to the lack of
coordination with the printing/fabrication process.
8