Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.
Securely tighten the bevel-adjustment knob.
6.
Securely tighten the 0° bevel-stop adjusting screw.
WARNING:
Attempting
to make cuts without
the bevel adjustment-knob
securely tightened
can result in serious injury.
OPERATING
THE SAW
(Figs. 13, 14 and 15)
It is important
to understand
the
correct
method for operating
the
saw. Refer to the instructions
in
this section to learn the correct
and incorrect
ways for handling
the saw.
,_, DANGER:
When lifting the
saw from the workpiece,
the blade
is exposed
on the underside
of
the saw until the lower blade
guard closes. Make sure that the
lower blade guard is closed before
setting the saw down.
_1_ WARNING:
To make sawing
easier and safer, always maintain
proper control of the saw. Loss of
control
could cause an accident
resulting
in possibly serious injury.
_i_ WARNING:
If the blade
comes
in contact
with the
workpiece
before it reaches full
speed, it could cause the saw to
"kickback"
towards
you, which
could result in serious injury.
,_
WARNING:
Always securely
clamp and support the workpiece.
Always
maintain proper control
of the saw. Failure to clamp and
support
the workpiece
and the
resulting
loss of control
of the
saw could result in serious injury.
Fig. 13
Fig. 14
Fig. 15
20
Tabla de contenido
