Tabla de contenido
This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum
cleaner from overheating. If a clog prevents the normal flow of air to the motor, the thermal
protector turns the motor off automatically. This allows the motor to cool in order to
prevent possible damage to the vacuum cleaner.
To correct problem: Turn off and unplug vacuum cleaner to allow the vacuum cleaner to
cool and the thermal protector to reset. Check for and remove clogs, if necessary.
Also check and replace any clogged filters. Wait approximately thirty (30) minutes
and plug the vacuum cleaner in and turn it on to see if the thermal protector has
reset.
Hose Swivel
➢ ➢ The hose swivel allows the hose to
➢ ➢ Check hose for twisting before
Edge Cleaner
➢ ➢ Active brush edge cleaners are on
➢ ➢ Guide either side of the Power Nozzle
Thermal Protector
- 20 -
turn without moving the canister.
This is helpful for cleaning in small
areas.
pulling canister.
both sides of the Power Nozzle.
along baseboards or next to
furniture to help remove dirt trapped
at carpet edges.
Tabla de contenido
