Technical Assistance - IKOS INTRA Serie Manual Del Usuario

Technical assistance

Before calling for service, check the information regarding troubleshooting in the following chart:
Problem
- Wet or green wood
Stove throws
- Chimney dirty or blocked
smoke
- Adverse weahter conditions
- Wet or green wood
Inconsistent
- Chimney dirty or blocked
burning or
- Insufficient wood or too dense
ineffective
- Dirt in the deflector
The glass
- Wet or green wood
gets dirty
- Insufficient wood
The wood
- Air intake regulator in firing position
burns too
- Poorly adjusted / sealed door
fast
- Damaged sealing cord
Ventilator
- The stove isn't hot enough
does not
- There is no power supply
work
Ventilator
runs with - Dirt on the lower flow grate
lower flow
Possible cause
EN // 51
USER'S MANUAL
Correcctions
- Add dry wood
- Clean the chimney
- Vacuum the burning chamber
- Use dry wood
- Keep the air intake regulator
open at maximum until the
fire is well lit
- Use dry wood
- Keep the air intake regulator
open at maximum until the
fire is well lit
- Add dry wood
- Reduce the intake air
- Adjust the closure
- Sealing cord replacement
- Put more wood
- Check the electrical
ventilator plug is connected
- General house electricity fail
- Clean the lower grate
EN