Selecting An Area; Video Motion Detection (Vmd) Submenu - Bosch FlexiDome XF Serie Manual De Instalación

FlexiDome
XF & DN
AREA Select submenu
EXIT

Selecting an area

To set-up an area for BLC (or VMD), access the area menu by selecting the
AREA option from the BLC (or VMD) menu. Upon entering the AREA
menu, the current area is displayed with the upper left corner flashing. The
flashing corner of the image can be moved with the Up, Down, Left, Right
arrow keys. Pressing the Select key moves the flashing cursor to the
opposite corner, which can now be moved. Pressing Select again freezes
the area and exits the area menu.

Video Motion Detection (VMD) submenu

Function Selection
VMD OFF, SIL, OSD
AREA 1, 2, 3, 4,
Select submenu
ACTIVE ON, OFF
MOTION Press SELECT to
reset indicator
SENS
EXIT
Note
If VMD areas overlap, motion is only detected in the area with the lowest
sequence number.
Bosch Security Systems | 2005-10 | V1.0
| Installation Manual
Select to access the Back Light Compensation
area menu (see selecting an area).
Return to Main menu
Description
When VMD is enabled and the camera can
generate SIL (silent) or OSD (monitor alarm
generates on-screen message) motion alarms.
• It is possible to set 4 motion sensitive areas (per
MODE).
• Press SELECT to enter the area set-up menu.
Every area can be enabled individually by
selecting YES.
Indicates the peak of measured motion in the
selected area
Use the LEFT/RIGHT keys to set the SENSitivity
for motion to the desired level. Motion above this
level triggers alarm.
Return to Main menu
EN | 25