Signal Tones; Overheating Protection Facility; Rating Plate; Operation And Handing - CASO DESIGN Pro3500 Manual De Instrucciones

14.1.3

Signal Tones

The appliance emits an acoustic signal after being switched on and in the event of a
fault.
► The acoustic signal continues to sound until the fault has been rectified or the
appliance has been switched off.
You will find more detailed information on error messages in the chapter entitled
„Fault indications".
14.1.4

Overheating Protection Facility

The appliance is equipped with an overheating protection facility. If the temperature
of the appliance exceeds the critical limit the appropriate error message is displayed
and an acoustic signal sounds. For safety reasons the appliance shuts off further
power supply. After the cooling-down phase the appliance can be switched off and
then back on again.
► The acoustic signal continues until the fault has been rectified or the appliance has
been switched off.
You will find more detailed information on error messages in the chapter entitled
„Fault indications".
14.1.5

Rating plate

The rating plate with the connection and performance data can be founded on the
back of the device.

15 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that you can
intervene quickly in the event of dangers.

15.1 Functioning and Advantages of Induction cooktops

With an induction cooktop the heat is not transferred by a heating element via the
cooking utensil to the food to be cooked, but rather the necessary heat is generated
directly in the cooking pot with the aid of induction currents.
An induction coil underneath the ceramic glass hob generates an alternating
electromagnetic field, which penetrates the ceramic glass hob and induces the heat-
generating current in the base of the cookware.
caso Pro3500
Please note
Please note
Warning
41