Important Safety Information - Corsair HXi Serie Manual

H X i S E R I E S
™
5. Connect the peripheral cables, PCI-Express cables, and SATA cables.
A. Connect the peripherals cables to your hard drive and CD-ROM/DVD-ROM
power sockets.
B. Connect the SATA cables to your SATA SSD or hard drive's power sockets.
C. Connect the PCI-Express cables to the power sockets of your PCI-Express
video cards if required.
D. Connect the peripheral cables to any peripherals requiring a small 4-pin connector.
E. Make sure all the cables are tightly connected. Be sure to save any unused modular
cables for future component additions.
6. Connect the AC power cord to the power supply and turn it on by pushing the switch
to the ON position (marked with "I").
Using Corsair Link with your new HXi Series
™
Before you are able to monitor your new PSU with Corsair Link
connect the power supply to an internal USB header using the included
USB cable.
1. Plug one end of the included USB cable into the USB PORT of the HXi Series,
seen here:
2. Plug the other end of the USB cable into a standard USB header on your
motherboard. (Check your motherboard manual for locations and compatibility).
3. Download the Corsair Link Dashboard software from www.corsair.com/linksw and
follow the instructions.
you must
™
9

Important safety information

CAUTION ELECTRIC SHOCK HAZARD!
1. Install in accordance with all manufacturer instructions and safety warnings.
Failure to do so may result in damage to your power supply or system, and may
cause serious injury or death.
2. High voltages are present in the power supply. Do not open the power supply case
or attempt to repair the power supply; there are no user-serviceable components.
3. This product is designed for indoor use only.
4. Do not use the power supply near water, or in high temperature or high humidity
environments.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
6. Do not insert any objects into the open ventilation or fan grill area of the power supply.
7. Do not modify the cables and/or connectors included with this power supply.
8. If this power supply uses modular cables, use only manufacturer supplied cables.
Other cables might not be compatible and could cause serious damage to your
system and power supply.
9. The 24-pin main power connector has a detachable 4-pin connector. This 4-pin
connector is not a P4 or ATX 12V connector. Do not force this cable in the P4 or
ATX +12V socket on the motherboard.
10. Failure to comply with any manufacturer instructions and/or any of these safety
instructions will immediately void all warranties and guarantees.
H X i S E R I E S
10
™