Insignia NS-HWG1655E Guia Del Usuario página 8

Step 3 Attaching the front to the bottom/panel assembly
:
1 Lay the bottom/panel assembly on its back, as shown, then insert three hidden cams (2) into the large holes in
the long sides of each side panel (B and C), two in the sides of each middle panel (D and E), and three in the
bottom (G).
2 Align the front (H) with the bottom/panel assembly and push the cam screws into the holes with the hidden
cams on the bottom/panel assembly.
3 Tighten each hidden cam with a Phillips screwdriver as tight as possible (about 180°).
You'll need:
8
Phillips screwdriver
www.insigniaproducts.com
55" Wood Finish TV Stand
2 Hidden cam (13)