Additional Safety Instructions - Ferax FTS-710 Manual De Instrucciones

2. sAFeTY INsTRUCTIONs
The following pictograms are used in these instructions for use:
Denotes risk of personal injury, loss of life or damage to the tool in case of
non-observance of the instructions in this manual.
Denotes risk of electric shock.
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Carefully read this manual before using the machine. Make sure that you know how
the machine functions and how to operate it. Maintain the machine in accordance with
the instructions to make sure it functions properly. Keep this manual and the enclosed
documentation with the machine.
When using electric machines always observe the safety regulations applicable in
your country to reduce the risk of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety instructions.
Keep these instructions in a safe place!

ADDITIONAL sAFeTY INsTRUCTIONs

The machine must not be damp and must not be operated in a wet environment.
Always inspect cable and plug before using machine. Only have damage repaired
by a qualified professional. Only insert the plug into the mains socket when the
machine is switched off. Wear protective gloves and sturdy footwear.
Donotsawmaterialscontainingasbestos!!!
• Wear protective goggles when working with materials which produce large amounts
of chips.
• Wear a protective mask when sawing other fibrous materials.
• Portable equipment used outdoors must be connected with a fault-current circuit
breaker.
• Extension cables and plugs must be approved for outdoors.
• Remove adjusting keys and wrenches before turning the tool on.
• Secure your workpiece with clamps. Always lead cable away from machine towards
the rear.
• Move machine towards the workpiece only when switched on.
• Always hold machine with both hands and ensure that you have a safe footing while
working.
• The machine may be operated only with the foot plate mounted. When sawing, the
foot plate must always rest on the workpiece.
Ferax
GB
35