Chapter 3 - Operation; Scanning Barcodes; Using The Powerpack - Bematech DC-3500 Manual Del Usuario

Chapter 3 – Operation

3.1 Scanning Barcodes

The DC-3500 is a highly versatile tool that can scan a wide range of barcodes but it is imperative that it is
used in the correct manner.
To scan a barcode:
4. Hold the DC-3500 horizontally and point it directly at the barcode you wish to scan.
5. Once in the correct position, press the SCAN button. An audible alarm is heard and the barcode
digits will appear on the LCD screen if the scan is successful.

3.2 Using the PowerPack

To save your time and effort in developing applications on D-3500, BEMATECH provides the system
management tool called "PowerPack" to let you control it directly.
The PowerPack management tools which installs in each of our WinCE product. It is free charge for you.
We offer several functions for let you control your device without any programming.
Backlight
This application is set up the Backlight of LCD Panel and Key pad. It allows operators to set backlight
duration, and also backlight can be set up as On & Off.
The Backlight Setting screen including 3 parts:
4. LCD
5. Keypad
6. Brightness Control Bar
67