System Reset - Bematech DC-3500 Manual Del Usuario

2.6

System Reset

Using the Warm reset function
Warm reset function allows you to return the device to the default settings, while not wiping
all data from the memory.
Insert the needle into the reset hole as shown and press down gently , to reset the device .
Using the Cold reset function
Cool reset function allows you to return the device to the factory settings, while wiping all
data from the memory.
Press down and hold the power key and Insert the needle into the reset hole to cold reset
the device.
NOTES
When charging the battery for the first time, charge for at least 12 hours
prior to use.
WARNING
Cold reset will erase ALL pre-configured data on the scanner.
Check carefully to make sure you have uploaded all important files to
your PC before proceeding with the reset.