Selecting The Function Type; Selecting The Parameters - Abicor Binzel ABIDRIVE V2 Instructivo De Servicio

6 Putting into operation
Depending on the default settings, the knob (5) can be used to increase or decrease the values.

6.3.1 Selecting the function type

1 Function type: 2-cycle 3
2 Function type: 4-cycle
Fig. 6 Function type selection
Press the selection button (4) to switch between the function types 2-cycle, 4-cycle and 2/4-cycle with interval.

6.3.2 Selecting the parameters

1 Wire feed rate (SPE)
2 Wire feed delay time (dt)
Fig. 7 Parameter selection
Press the selection button (6) to select the individual functions.
The functions are shown by the display indicators.
 Fig. 5 Front panel display on page EN-11
EN - 12
1
2
3
4
Function type: with interval (2 or 4-cycle) 4
1
2
3
4
5
6
3 Wire retraction time (rE) 5
4 Wire feed with interval (ton) 6
TIG cold-wire feeder
Function type selection button
Wire feed interval break (tot)
Parameter selection button
BAL.0415.0 • 2018-10-22