Usb - DeFelsko PosiTector RTR-3D Manual De Instrucciones

USB

When USB Drive is checked, the PosiTector gage uses a USB mass
storage device class which provides users with a simple interface to
retrieve stored data in a manner similar to USB flash drives, digital
cameras and digital audio players.
USB Drive is also required to import stored measurements into
PosiSoft Desktop software (pg.24). Once connected, any computer
can view measurements stored in memory by navigating a virtual drive
labeled "PosiTector" using the included USB cable.
A formatted HTML report is viewed by selecting the "index.html" or
"START_HERE.html" file found in the root directory. Optionally, text
".txt" files located in each batch folder provide access to measurement
values. Stored datasets and graphs can be viewed or copied using
universal PC/Mac web browsers or file explorers.
When your PosiTector is first connected to your Windows PC via a
USB cable, an enumeration process is started that installs device
drivers without re-booting your computer. You may see several pop-
up windows in the taskbar at the bottom right of your screen. Wait for
the entire process to be completed before proceeding.
Serial Streaming via USB
(Advanced models only)
Advanced gage bodies have the ability to serial stream live readings
from the USB port
The following document links will help operators use this feature:
PosiTector Advanced USB Serial Streaming Instructions --
http://www.defelsko.com/usb/PosiTectorAdvanced-USBserial.pdf
Required driver (referenced in above document) --
http://www.defelsko.com/usb/gserial.zip
Retrieving stored screen captures:
The last 10 screen captures stored in memory can be accessed by
navigating to the "screen capture" directory within the "PosiTector"
virtual drive.
NOTE:
When connected, power is supplied through the USB cable.
The batteries are not used and the body will not automatically power
down. If rechargeable (NiMH) batteries are installed, the instrument
will trickle charge the batteries.
26