DeFelsko PosiTector RTR-3D Manual De Instrucciones página 27

Ocultar thumbs Ver también para PosiTector RTR-3D:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Securing your Access Point -
To ensure the PosiTector is only accessible to authorized devices, it
is important that you enter a passphrase (password) for the Access
Point. The default Passphrase is password.
In the Connect > WiFi > Setup menu, select AP Passphrase.
Press
button to display on-screen keyboard. Enter a Passphrase
for the Access Point. The Passphrase will be required for all devices
connecting to the PosiTector's Access Point.
The PosiTector is now visible to all WiFi enabled devices. Simply connect
your devices WiFi to the new PosiTector Access point. All PosiTectors
are uniquely identified by their respective gage body serial numbers.
AP Channel - Default Channel: 6
For most users, the default channel will not have to be altered. If you
are experiencing poor connection or are unable to connect, try another
channel.
In the Connect > WiFi > Setup menu, select AP Channel.
Press the UP center navigation button to highlight the channel. Use
the (-) or (+) buttons to change the channel. Press the DOWN
navigation button and select OK. Press the
button.
Networks: With WiFi Enabled (pg. 24) the Gage will allow the user to
add a new network and will automatically check for available local
networks. Available networks detected by the Gage are listed on the
screen along with any networks that the Gage has previously been
connected to that are not currently within connection range.
Information: Gage displays information about the local WiFi network connection
including...
SSID: the network's name
State: displays if the Gage is connected to the network or not
IP Address: the network's IP Address
Setup: Allows user to setup a WiFi connection
IP Settings: enter the IP information as follows...
IP Type (DHCP or Static), IP Address, Gateway, Netmask, DNS1, DNS2
Server Enable: enables a connection between the network and the Gage
Gage Name: enter a name for the Gage (up to 14 Characters).
AP Channel: The access point channel corresponding to a frequency range.
(Default Channel: 6)
AP Passphrase: A series of characters, numbers or symbols used to log on to
a WiFi network. (Default Passphrase: password)
WiFi Reset: erases all WiFi settings
25
Tabla de contenido
loading

Este manual también es adecuado para:

Positector rtr 3d

Tabla de contenido