Flip A3 Serie Manual De Instrucciones página 21

3. In the right pane, enter the password
IRCAM, click Login, and then go to
the desired tab. You can change the
password later.
4. On the desired tab, make the necess-
ary changes.
Step 6: Connecting FLIR IR
Monitor to a camera
Applicability
This section is dependent on the camera
model.
General
When you start FLIR IR Monitor for the
first time, you will need to connect FLIR
IR Monitor to one or more cameras. You
do this in the Select Camera dialog box
(see below).
Figure
Procedure
1. On the Start menu, click FLIR IR
Monitor (Start > Programs > FLIR
Systems > FLIR IR Monitor).
2. Do one of the following:
• Click the gray screen.
• On the Camera menu, click Con-
nect.
3. In the Select Camera dialog box, do
the following:
© 2011, FLIR Systems, Inc. All rights reserved worldwide.
Publ. no. T559492, rev. 010
1. Using the Rows and Columns
list boxes, create a camera grid
with up to 3 × 3 cameras.
2. In the left pane, select one or
more cameras and move them to
the camera grid using a drag-
and-drop operation. Click View
cameras in grid.
Step 7: Changing settings
using FLIR IR Monitor
Applicability
This section is dependent on the camera
model.
General
Using FLIR IR Monitor, you can not only
lay out analysis tools and set up alarms
but also change and adjust many settings
relating to one or more cameras.
Figure
Procedure
1. In FLIR IR Monitor, do one of the
following:
• If FLIR IR Monitor is connected to
one camera only, go to Step 2
below.
• If FLIR IR Monitor is connected to
several cameras, click the window
for the camera that you want to
change or adjust the settings of. A
green frame around a camera win-
EN-US English
21