Flip A3 Serie Manual De Instrucciones página 19

Step 3a: Connecting the
camera (FLIR A3XX)
Figure
Callouts
1. Network cable with an RJ45 connec-
tor for Ethernet connectivity and
PoE™ (dependent on the camera
model).
2. Video cable with a BNC connector for
CVBS (composite video) output (de-
pendent on the camera model).
3. Power cable for 12–24 VDC power in.
4. Digital I/O ports, opto-isolated (six-
pole screw terminal).
(A) Power indicator.
(B) Hardware reset button (for a factory
default reset).
See also
For complete information on indicator
signals and pin configurations, see the
documentation on the User
Documentation CD-ROM.
© 2011, FLIR Systems, Inc. All rights reserved worldwide.
Publ. no. T559492, rev. 010
Step 3b: Connecting the
camera (FLIR A6XX)
Figure
Callouts
1. Network cable with an RJ45 connec-
tor for Ethernet connectivity and
PoE™ (dependent on the camera
model).
2. Power cable for 12–24 VDC power in.
3. USB cable with a USB mini-B con-
nector for control and image transfer.
4. Digital I/O ports, opto-isolated (six-
pole screw terminal).
(A) Hardware reset button (for a factory
default reset).
(B) Power indicator.
See also
For complete information on indicator
signals and pin configurations, see the
documentation on the User
Documentation CD-ROM.
Step 4: Finding and
detecting cameras in a
network using FLIR IP
Config
General
Before you start working with the
cameras, you need to detect which
cameras are available in the Ethernet
network. You may also want to change
EN-US English
19