Cleaning Primary Filter - Panasonic MC-UL423 Instrucciones De Operación

Dust Bin Lid
Couvercle du
godet à poussière
Tapa del
compartimiento
de polvo
Dust Bin Lid Latch
Loquet du couvercle
du godet à poussière
Cierre de tapa del
compartimiento
de polvo Dust bin
lid latch

Cleaning Primary Filter

Primary Filter
Filtre primaire
Filtro primario
Primary Filter
Filtre primaire
Filtro primario
- 40 -
It is recommended to clean the filter
with cold water at least every three (3)
months. Check the primary filter
frequently and clean when dirty.
➢ Turn off and unplug the vacuum
cleaner.
➢ Remove dust bin (See EMPTYING
DUST BIN, p. 34).
➢ Pull the dust bin lid latch and open
the lid.
➢ Remove the primary filter.
➢ Wash with cold water only, DO NOT
use detergent or soap.
➢ Once the filter is washed clean,
squeeze by hand and allow to air
dry.
➢ Allow filter to dry for 24 hours
before placing back into vacuum
cleaner.
NOTE: When the cleaning of the filter
no longer restores vacuum cleaner
suction to full power, replace the filter.
DO NOT operate without primary filter
installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
TO REPLACE FILTER
➢ Place the primary filter into the dust
bin lid.
➢ Close the dust bin lid. Be sure the
lid snaps in place. A noticeable
"click" should be heard.
➢ Reinstall the dust bin into the
vacuum cleaner (See EMPTYING
DUST BIN, p. 36).