Alarms; Low Fuel, Too Shallow, Too Deep, Fish Alarm, Temp Value, Temp Rate, Low Battery - Navman FISH450 Tricolor Manual De Instalación Y Funcionamiento

4-1 Alarms

For more information on alarms see Operation -
Alarms (section 3-1).
Access the Alarms menu by
a single press of the Alarm
key (provided the beeper is
not active) or through the
Setup menu screen.
Selecting items and
changing values
Press the Cursor Up or
Down key to highlight an
alarm, then press the Cursor
Right key to select it.
An alarm screen has a
trigger value and an On / Off
value. Press the Cursor Up
or Down key to switch
between them.
The highlighted value may
be changed using the Cursor
Left and Right key. Press the
Menu key to save and exit
once both values have been
set.
The alarm value is retained
even when the alarm is
disabled.
External beeper
An external beeper may
be installed when a louder
secondary
indication is required. This can be positioned
anywhere on the boat. For installation details
see Installation - Wiring (section 6-6).
NAVMAN
FISH450 Tricolor FISHFINDER Installation and Operation Manual
alarm
Symbol Alarm Beeper Alarm condition
Name cycle
Low 1/2 sec
Fuel
Too 1/5 sec Shallow
Too 1/2 sec
Deep
Fish 3 short
Alarm beeps
Temp 1/2 sec
Value
Temp 1/2 sec
Rate
Low 1/2 sec
Battery
is met when:
the fuel level is less than
the alarm trigger value.
the depth is less than the alarm trigger value.
the depth is greater than
the alarm trigger value.
an echo matches the
profile of a fish.
the temperature equals
the alarm trigger value.
the rate of change of
temperature equals
the alarm trigger value.
the battery voltage is less
than the alarm trigger value.
13