Brief Introduction; Overview; Receiver - Oregon Scientific EW98 Manual De Instrucciones

BRIEF INTRODUCTION

Thank you for your purchase of this Projection Alarm
Clock. Please read these instructions carefully and
keep the manual well for future reference.
The receiver unit has a clear and easy-to-read
display that shows the indoor temperature, time,
calendar, the maximum & minimum temperature
records in the past 24 hours as well as the outdoor
temperature measured and transmitted from the
remote sensors. It is able to receive and display
readings from up to 3 remote sensors.
The 433 MHz technology means no wire installation
is required and you can place the sensors anywhere
you like within 30m (100ft) from the main (indoor)
unit.
This product is designed to synchronize its date and
time automatically once it is within range of the
signal from the atomic clock in Germany/England.

OVERVIEW

RECEIVER

1
2
3
4
12
1.Projector:
- Use it to project the time and temperature.
2.SNOOZE/LIGHT key:
- In normal time mode, press it once to turn on
the backlight for 5 seconds.
- Press it to silence the current alarm when it is
going and enter the snooze mode for 8 minutes.
3.LCD display:
- Displays time, indoor & outdoor temperature, date.
2
5
9
6
10
7
8
11
13 14 15 16
17
18
19
20