Saving The Parameters; Leds - Televes CDC Manual De Instrucciones

User Manual
For example for 5.5 MHz:
e.- Channel-frequency mode
The last menu lets us select the channel-
frequency mode for the output frequency.
There are 7 tables for the available channels.
The selection is carried out using the
and
buttons:
Frequency mode
Channel mode, table 4 selected
As we change from the frequency mode to
the channel mode, the lowest channel is
automatically chosen from the selected
table. As we change from the channel mode
to the frequency mode, the channel fre-
quency that was selected appears on the
display.
There are 7 possible channel tables that can
be selected using the menu:
· Table 1: CCIR, New Zealand
Indonesia. Italian channels.
· Table 2: China, Taiwan and CCIR hyper-
band.
· Table 3: M/N, Chile.
· Table 4: France.
· Table 5: Australia.
· Table 6: South Africa, K1 (8 MHz), I
(Ireland, 8MHz).
· Table 7: Old URSS and OIRT.
5.1.1.- Parameter saving
To save the data, it is necessary to press the
button for approximately 3 seconds.
When the data is correctly saved, the central
part of the digits on the programmer flashes
on and off:
If the configuration data is modified but not
saved, the previous configuration is retrie-
ved after 30 seconds, in other words, the
changes that have been carried out are can-
celled.
49
Headend Control - CDC

5.1.2.- LEDs

Finally, the programmer's LEDS indicate the
and following operational status:
A B
Correct operation
A B
Modem error
A B
OSD error
The "C" LED is not used.
C
C
C