D-Link AirPremier DAP-2310 Guía De Instalación Rápida página 3

Connecting the
DAP-2310 to your network
A.
Connect the power adapter to the receptor on the rear panel of the
DAP-2310 and then plug the other end of the power
adapter to a wall outlet or power strip. The power
LED will turn ON to indicate proper operation.
Using an Ethernet cable, insert one end of the cable
B.
to the LAN port on the rear panel of the DAP-2310
and the other end of the cable to a switch.
Note: You can also connect the DAP-2310 directly to the
computer that will be used for configuration. The LAN LED
will illuminate to indicate a proper Ethernet connection.
C.
Computers with 802.11 b/g/n wireless adapters
can connect to the DAP-2310.
B. LAN Port
Connects DAP-2310
to a switch or PC.
C. Antennas
Used to broadcast wireless network
and recieve connections from
802.11 b/g/n wireless clients.
D. Reset
Reset the Access Point.
A. Power Receptor
Receptor for Power Adapter.
3