Tabla de contenido
Idiomas disponibles
Idiomas disponibles
11 - CONFIGURATION MENU (installer)
As opposed to the thermal differential, the temperature can be adjusted
MODULATING PROPORTIONALLY (P OP)
minutes (default 10 minutes).
This system maintains the desired temperature more stable, whilst
increasing the user's comfort sensation and saving on energy
consumption.
EN
A long cycle is recommended for systems with high thermal inertia (cast
iron radiators, floor systems) and a short cycle for systems with low
thermal inertia (fan coils).
11.2.1 - Selection of the temperature adjustment mode ( ifferential ON/OFF or roportional)
From normal thermostat operation, access the menus by pressing
With the keys
select la item Set REG.
Press
OK
to confirm.
It will be possible to select temperature adjustment mode between
Thermal differential (On:OFF)
proportional (PrOP) operation.
Use the
keys to select the desired temperature adjustment mode.
After making your choice press
HYSTERESIS
if you have opted for
opted for
PrOP
(see next paragraphs:
38
r
setting cycles from 7 to 20
factory setting or
Modulating
OK
to confirm and display the screen to set
On:OFF,
or to set the
PERIOD
if you have
11.2.2 e 11.2.3).
°C/°F
T SET
OFF
ON
example of modulating proportional adjustment
D
for 5 secs.
the «
M
ode
» key, select
Set Prog,
thermal inertia over temperature
of the heating element
ON
OFF
ON
OFF
P
press
OK
to confirm.
/OK
time
Capítulos
Tabla de contenido
