Off (Disabling The Thermostat); Structure Of The Main Menus (Use And Configuration) - Perry 1TPTE011B Manual Del Usuario

7 - USE OF THE THERMOSTAT
IT

7.3 - OFF (disabling the thermostat)

This setting has the purpose of locking thermostat functions when
heating or cooling must remain off.
1- In the condition of normal operation of the thermostat, press the
button briefly to set the thermostat to
off the system».
OFF
2- The display shows , to indicate that the thermostat is disabled and
all functions are inactive; the display only shows room temperature
reading and the Antifreeze protection temperature set (for winter mode).
in WINTER mode with antifreeze temperature disabled or in Summer mode, the temperature set will not be visible
in the event of low batteries, the symbol
3- Press key / OK to reactivate the thermostat

8 - STRUCTURE OF THE MAIN MENUS (use and configuration)

User Menu:
SET TEMP
(modification or disabling of Set antifreeze temperature)
STAG SET
(Winter
PASS UT
(set user password)
OFF and consequently «Switch
will flash on the display.
.
T
or Summer mode)
/ OK
Antifreeze protection temperature
(if deactivated, not visible)
Installer or skilled user menu:
- SET REG
(selection of temperature control mode)
- SET UNIT
(selection of temperature unit of measure °C/°F)
- SET CORR
(correction of detected room temperature)
- SET BLOC
(it lets you limit the value of set temperature points)
- POMP ON
(disabling / enabling the descaling function)
- CONTRAST
(to change display contrast)
- PASS UT
(to restrict the use of user and/or installer functions
of the thermostat)
- FACTORY
( RESET operation)
- INFO
(information about the firmware version installed)
/OK
EN
Room temperature
Set PROG
33