Elicent AXM Manual De Instalación, Uso Y Mantenimiento página 9

• Connect the cable corresponding to the speed that you wish to time to the Motor purchased the product.
Line terminal on the electronic Timer panel.
• Connect the cable corresponding to the other speed to the general power strip
(TB) for operation without the timer.
Available versions:
• STANDARD. Does not require setting
• TIMER. Adjustable timer from 3' to 15'.
In the event that this appliance is not used, it is recommended that you disconnect
it from the mains electricity supply.
SETTINGS AND OPERATION:
Perform the necessary settings according to the model installed.
TIMER (see fig. 4A - 4B)
To set the timer, turn the TIMER pin clockwise to increase the time (3'- 15').
The extractor fan will start, activated by the switch. When the switch is deac-
tivated,
the fan continues working for the set time and then turns off.
To finish the installation, verify that all the connections have been done co-
rrectly
and make sure that the cables are placed correctly.
Place the connection cover in the correct position again and ensure that it cannot
be removed without using a tool.
Make sure that the blades turn freely.
CLEANING AND MAINTENANCE:
• MAINTENANCE AND CLEANING CARRIED OUT BY A QUALIFIED
PERSON.
• Before cleaning make sure that the appliance is not connected to the electric
network
and prevent it from being reconnected by accident.
• Clean with a damp cloth regularly.
• For maintenance operations
• The casing assembly must be removed from its position (see fig. 2)
• Remove the two reducer pipes (V): Loosen the screws on the reducer pipes,
turn each reducer pipe about 9º in an anti-clockwise direction and remove the
pipe by pulling it (see fig. 5).
• The motor, propeller and all components should be inspected periodically to
ensure that they are not dirty and have not suffered any damage. The frequency
of inspections depends on the appliance's operating conditions.
• Remove the dirt on the propeller and the inner parts of the casing to avoid
imbalances during operation, a decrease in aerodynamic performance and motor
damage.
• Motor bearings do not need maintenance.
• Once maintenance is complete, refit the reducer pipes and casing assembly.
Always demand original spare parts for repairs.
THE MANUFACTURER reserves the right to make any technological im-
provement or modification without prior notification.
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equip-
ment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you