Phonic ACAPELA 16 Manual Del Usuario página 18

Invert Phase Button: This button inverts the phase
of the current signal.
Pan Control: Select the pan control and use the
onboard jog wheel to adjust the left and right pan of
the input signal.
AUX Send Controls: These virtual rotary controls
can be used to adjust the level of the currently se-
lected channel that is sent to the corresponding AUX
mix. The Pre/Post buttons allow you to change the
corresponding sends from the channel from pre-
fader, pre-EQ, pre-dynamics and pre-fader to post-
fader, post-EQ, post-dynamics, post-fader.
Group Assignment: Push any of these buttons to
send the currently selected channel to the corre-
sponding group mix. The signal level of the group
mix will also be displayed in the button (in decibels).
To Main Button: Pushing this button sends the
currently selected channel's signal to the main mix.
Channel Select: The currently select channel will
be shown in the top right-hand side of the menu.
Users can select the channel they wish to view the
properties of by pushing the left and right arrows.
Solo Button: This will activate the solo function on
the currently selected channel. When a channel is
soloed, the signal will be diverted to the control room
mix for monitoring. If the current channel has safe
soloing applied, the word SAFE will appear within
this button.
16
Off / On Button: This button will turn the currently
selected channel on and off.
Channel Fader: Users can use this virtual fader
to adjust the level of the currently selected input
channel.
Channel Meter: This meter provides real-time up-
dates on the signal level of the currently selected
channel. The meter displays the input or output
signal level, depending on how the Pre/Post Meter
button is set.
Pre/Post Meter Button: This button will change the
level meter between a pre-fader (Input) meter to a
post-fader meter.
Channel Name: The channel's name can be viewed
and edited at the bottom of the fader.
Source Buttons (Main Only): The bottom of the
Main Overview page offers individual source buttons
for each channel and submix. Pushing any of these
will immediately assign it directly to the main mix.
Please remember that assigning the mix will still
be dependent on whether the channels' respective
volumes are turned up and whether the channels
themselves are on.
Acapela 16