Connections To Be Made - Axxess BX-GM6 Instrucciones De Instalación Para La Pieza

Applications
CHEVROLET PONTIAC
Cobalt 2007-2010 G6 2010
HHR 2006-2011 G6 2009 (5th digit of VIN
Malibu 2008-2012 must be a J, K, or L)
G5 2007-2009
Solstice 2006-2009
BX-GM6
SATURN
From the 16-pin harness with stripped leads to the aftermarket radio:
Aura 2007-2009
• Connect the (2) Red wires to the accessory wire.
Sky 2007-2009
• Connect the Blue/White wire to the amp turn on wire.
• Connect the Orange/White wire to the illumination wire. (If the aftermarket
• Connect the Brown wire to the mute wire. (If the aftermarket radio
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
• Tape off and disregard the Green, Green/Black, Purple,
2

Connections to be made

Note: If installing the AX-LCD (sold separately), there will be an
accessory wire there to connect as well.
Note: This wire must be connected whether or not there is a
factory amp in the vehicle or not. Failure to do so will result in
the interface not being able to be programmed.
radio has no illumination wire, tape off and disregard this wire).
has no mute wire, tape off and disregard this wire).
Purple/Black wires, they will not be used in this application.
Continued on the next page