Show Temperature Deviation; Determine Reference Value; Select Tolerance Range; Scan Temperature Deviation - Powerfix Profi HG00304 Instrucciones De Utilización Y De Seguridad

Show temperature deviation

The temperature deviation is the difference between a previously established refer-
ence value and a temperature measurement. The display
as numeric values and displayed in colour. An acoustic signal also sound.

Determine reference value

P ress the measure button
you wish to use the temperature as the reference. The temperature is indicated
in the display
W hilst holding the Measure button, press the °C / °F / SET button
the temperature value as the reference value. This temperature is indicated in
the display next to „REF" as the reference display

Select tolerance range

You can set the temperature deviation from the reference value as of which the
device will respond with a visual and acoustic signal.
T o do so, whilst the reference value
button or the
10
the right ( ) or to the left ( ) above the tolerance range
display.
Use this method to select the tolerance range indicated below the display:
OFF

Scan temperature deviation

S elect a reference temperature as described above.
P ress the Measure button
wish to measure. The temperature is indicated in the display
24 GB/IE
and aim the laser pointer
3
.
5
button . Using this button the
12
0.5 °C
1°F
and aim the laser pointer
3
5
1
.
6
appears in the display
6
3 °C
5°F
indicates the deviations
at the area of which
to use
11
, press the
5
symbol will move to
selection in the
9
5.5 °C
10°F
at the area you
1
.
5