BOMANN TSG 7402.1 Instrucciones De Servicio página 80

Control panel
Power: Press the button for about 3 sec. to
1
turn on/off the power supply.
2 Program: Button to select the rinse pro-
grams [ ECO – 1H – Rapid].
3 Extra Dry: Button to activate / deactivate the
[Extra Dry] function. Note that the function is
program dependent!
4 Delay: Button to select the start delay by
1-24 hours. Press the Start/Pause button and
the appliance start automatically after the se-
lected time delay has expired.
5 Self-Cleaning: Button to select the program
[Self-Cleaning].
6 Anti-Bac.: Press the button for about 3 sec.
to activate / deactivate the [Anit-Bac.] function.
7 Glass: Button to select the program [Glass].
8 Start/Pause: button to start/pause the se-
lected or running program.
9 Display: Salt consumption (water hardness)
and start delay are selected via the display.
The start delay (when activated), the program
remaining time and any error codes are dis-
played.
Control lamp: lights up, when dishwasher
salt needs refilling.
Control lamp: lights up, when the water
supply is closed, or the water tank is not filled.
Starting a program
 The water supply must be opened to maximum
pressure OR the water tank must be filled.
 Load the dishwasher baskets.
 Fill in the detergent.
 Turn on the appliance.
 Set the required program options.
 Start the operation.
Interior light
The interior light switches on automatically:
by opening the unit door in power-on or
-
standby mode,
by pressing a button during the rinse cycle
-
After about 5 minutes with the door open or after
the last button press, the interior light switches off.
Changing the program
CAUTION:
A program change should be done only a short
time after starting the program. Otherwise, maybe
detergent has been dissolved and rinse water
drained off.
First press the Start/Pause button to stop the

current rinse program.
 Press the Program selection button for about
3 seconds.
 Select a new program and start the new opera-
tion.
80