Orbegozo FH 6060 Manual De Instrucciones página 16

FH 6060
Switch off the heater:
To switch off the heater turn the selector switch C to the position (
from the wall-socket. Always unplug the heater from the wall-socket when not in use.
Revolving
The heater cans 90 degree revolving by hand.
Fig.1
Wall mounting
This heater also can mount on a flat stable surface e. g. room wall to save space.
For mounting the heater see fig. 2 to 4:
Pay attention to the above mentioned safety information's and following notes to location and
mounting:
If you attach the heater on the wall, you must keep in any case the minimum distance of 120 cm of
•
the lower heater housing up to the floor, from the ceiling to the upper heating house a minimum
distance of 50 cm and to keep a safety distance of the least 120 cm to combustible subjects, such
as shelves, furniture, pieces of furniture, walls, curtains or buildings or similar. Fire risk! The
appliance openings must be not obstructed in any way.
The device may be not fastened to walls from synthetic material, or other flammable materials as
•
for example wood, panels, paper or similar. By disregard it can come to the fire risk!
Never place the appliance directly under, over, beside or in the near to a wall socket!
•
Never cover the fan heater. Do not place any items of clothing, hand towels or similar over the
•
grille to dry. Fire hazard!
Use the devise only under surveillance.
•
The heater may be used only as a firmly mounted wall device. The appliance is not suitable for
•
ceiling mounting.
For installation of the heater care must be taken not to damage concealed cables. Please be careful
•
while drilling the holes. Never drilling holes under, above, besides etc. from a wall-socket.
Therefore, no holes under or above wall sockets get going and mount the device not or directly
•
near a socket as well as directly near combustible objects or pieces of furniture etc. Pay attention
to the named instructions and safety regulations.
The accessories to the wall assembly are enclosing.
•
If you have found a suitable place for this device, mount now by means of provided screws and
•
dowels the heater on the wall. Hang up now the heater. The minimum distances must be observed
(see Fig. 2).
Please pay attention, that the heater is mounted in even and firmly position. Do not use the heater
•
if the device is not fix mounted or uneven position on the wall.
For mounting the heater see Fig. 2 to 4.
•
). Remove the mains plug
16