ASROCK ConRoeXFire-eSATA2 Manual De Instrucciones página 38

STEP 2: Install Windows
After setting up BIOS, you can start to install Windows
your system.
Using SATA / SATAII HDDs and eSATAII devices without NCQ and Hot Plug
functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "ATA/IDE Configuration" to [Enhanced], and then in the option
"Configure SATA as", please set the option to [IDE].
STEP 2: Install Windows
After setting up BIOS, you can start to install Windows
your system.
2.17 2.17 2.17 2.17 Untied Overclocking T 2.17 Untied Overclocking Technology Untied Overclocking T Untied Overclocking T Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI bus. You may set "CPU Host
Frequency" option of BIOS setup to [Auto], which will show you the actual CPU host
frequency in the following item. Therefore, CPU FSB is untied during overclocking,
but PCI bus is in the fixed mode so that FSB can operate under a more stable
overclocking environment.
Please refer to the warning on page 6 for the possible overclocking risk before
you apply Untied Overclocking Technology.
3 8 3 8 3 8
3 8 3 8
ASRock ConRoeXFire-eSATA2 Motherboard
® TM TM
Vista / Vista 64-bit OS on your system.
Advanced screen
® TM TM
Vista / Vista 64-bit OS on your system.
echnology echnology echnology echnology
® TM TM
Vista / Vista 64-bit on
IDE Configuration.
® TM TM
Vista / Vista 64-bit on