Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Random playback
The tracks on the CD can be played back in random sequence.
1. Press the [RANDOM] button on the remote control unit while the CD is playing. The tracks are now played back randomly.
2. You can skip tracks or skip back to tracks using the [
3. After all tracks have been played back, the CD stops automatically.
4. To stop playback in random sequence, press the [RANDOM] key again in this mode. The CD will now be played back in the
correct order.
Nummers opslaan
32 nummers kunnen worden afgespeeld in de CD-modus en 64 nummers in de MP3-modus.
Storing numbers
32 tracks can be played in CD mode and 64 tracks in MP3 mode.
Note: Storing tracks is only available in stop mode.
1. Press the [MEMORY] button to save the tracks
2. Press the [
] or [
]-buttons to select the track you want to store.
3. Press the [MEMORY] button again to confirm.
4. Repeat steps 2 to 3 to store more tracks.
5. When all desired tracks have been stored, press the [START/PAUSE] button to play back the stored tracks.
Deleting stored numbers
To delete a stored number, press the [STOP] button twice or open the CD tray with the [EJECT] button and close it again.
BT-MODUS
You can connect a mobile device to your radio via BT. Switch to BT mode by pressing the [FUNCTION] button and selecting BT
or pressing the BT/AUX button on the remote control.
1. Turn on the BT function of your mobile device and search for the BT's Audizio Prato name.
2. If a password is required, enter the "0000".
3. Play the desired audio file from your mobile device. It will be sent to your radio automatically and will sound over the
speakers.
4. To disconnect the connection between your mobile device and your radio, turn off the BT function on your mobile device
or change the mode of your radio by pressing the [FUNCTION] button.
Note: If the signal is weak, make sure there is no interference between your mobile device and the radio.
Some mobile devices may disconnect on incoming calls.
USB MODE
Switch to USB mode by pressing the [FUNCTION] button and selecting USB or pressing the [CD/USB] button on the remote
control twice.
1. Insert a USB stick containing MP3 audio files into the USB port. The audio files are played automatically.
2. Press the [
] or [
]-buttons to switch between tracks.
AUX MODE
Connect a mobile device to the radio using AUX.
Switch to AUX mode by pressing the [FUNCTION] button and selecting "AUX" or pressing the [BT/AUX] button on the remote
control twice.
1. Connect a mobile device to your radio using an AUX cable (not supplied).
2. Play the desired audio file from your mobile device.
3. Adjust the volume using the volume control or [VOLUME] buttons on the remote control.
The AUX terminal allows you to connect various devices such as an MP3 player, cassette player, minidisc player, DVD player,
etc. to the AUX terminal.
Note: If the radio has been in AUX mode for more than 4 hours, it will automatically switch to standby mode. 10 minutes
before the radio goes into standby, the display will show "AUTO-OFF". Press the [RANDOM] button on the remote control to
deactivate the AUTO-OFF function.
USB CHARGING
In each mode, you can connect a device, such as your mobile device, to your radio for charging using a suitable USB cable (not
included). Use the USB charging port. Remove the UBS cable once the device is fully charged.
] or [
]-buttons. They are also random.
12
Tabla de contenido
