Technical Specifications - Microgard 801-G02 Instrucciones De Empleo

4

TECHNICAL SPECIFICATIONS

Physical performance of MICROCHEM
Property
Abrasion resistance
Flex cracking resistance
Flex cracking resistance at
low temperatures (-30°C)
Trapezoidal tear resistance
Tensile Strength
Puncture resistance
Resistance to Ignition
Resistance to flame
Seam strength
*
According to EN 943-2, when only the minimum performance requirement (Class 2 of 6) for puncture resistance is achieved the reader should be advised that the chemical protective
clothing may not be suitable for use where there is a high risk of puncture.
MICROCHEM 6000 chemical permeation testing (Permeation Resistance)
®
Physical
Test Method
*
State
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Gas
EN ISO 6529 Gas
EN ISO 6529 Gas
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
EN ISO 6529 Liquid
* Gloves and Boots tested according to EN 374-3.
Note: For information on the permeation resistance and mechanical performance of the outer glove please refer to the glove manufacturers instruction for use document. A copy of which is
provided with each suit.
** ATTENTION! According to EN 943-2, as Class 2 of 6 was not achieved the glove is not suitable for use against this chemical under continuous exposure. Wearers are therefore advised if
continuous exposure to this chemical is expected then an additional outer glove should be selected which achieves at least Class 2 according to EN 943-2 requirements. For advice please
contact Microgard Ltd.
ISO/FDIS 16603 Resistance to penetration by blood/fluids under pressure
ISO/FDIS 16604 Resistance to penetration by blood borne pathogens
EN ISO 22610 Resistance to wet bacterial penetration (mechanical contact)
ISO/DIS 22611 Resistance to biologically contaminated aerosols
ISO/DIS 22612 Resistance to dry microbial penetration
6000
®
Test Method
EN 530
EN ISO 7854
EN ISO 7854 (-30°C)
EN ISO 9073-4
EN ISO 13934-1
EN 863
EN 13274-4
EN 13274-4
EN ISO 13935-2
Chemical
Dichloromethane (DCM)
Methanol
n-Heptane
Toluene
Diethylamine
Sodium Hydroxide (40%)
Sulphuric Acid (96%)
Ammonia
Chlorine
Hydrogen Chloride
Acetone
Acetonitrile
Ethyl Acetate
Carbon Disulfide
Tetrahydrofuran (THF)
MICROCHEM 6000 Fabric EN14126: 2003 Results
®
Test Method
Minimum Performance
Class Required For EN943-
2:2002
4 of 6
1 of 6
2 of 6
3 of 6
4 of 6
2 of 6
*
Pass
1 of 3
5 of 6
PERFORMANCE CLASS ACCORDING TO EN 943-2
MICROCHEM
®
Visor
6000
6 of 6 4 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
6 of 6 6 of 6
MICROCHEM 6000
®
Performance Class
6 of 6
1 of 6
2 of 6
3 of 6
4 of 6
2 of 6
Pass
2 of 3
5 of 6
Ansell Barrier ETCHE
Glove Boot
*
2 of 6 2 of 6
6 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
0 of 6 3 of 6
**
6 of 6 3 of 6
5 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
6 of 6 3 of 6
EC Classification
Pass 20 kPa
6 of 6
6 of 6
3 of 3
3 of 3
*