General Information; Typical Areas Of Use; Limitations & Warnings; Liability Information - Microgard 801-G02 Instrucciones De Empleo

página de 134

/ 134
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

MICROCHEM

6000-GTS and GTB are fully

encapsulated, limited-use gas-tight suits. As

fully encapsulating the suit is worn over working

clothes and the breathing apparatus. A number of

Model options are available, as described in this

MICROCHEM

gas-tight suits are designed to protect

workers from hazardous substances, in particular

the wearer's skin from danger caused by exposure to

solid, liquid or gaseous chemicals. They are suitable

for use within certain contaminated environments

only and wearers are strongly advised to read

carefully these operating instructions. In accordance

with EC regulations all wearers of such Personal

MODEL

INFORMATION

PRODUCT RANGE

MICROCHEM

6000

GTS

MICROCHEM

6000

GTB

MICROCHEM

6000

GTS

MICROCHEM

6000

GTB

Barrier - Ansell Barrier

Gloves only -

Note: the "X" is used to indicate the product size. For further information contact Microgard Ltd.

MICROCHEM

6000, limited-use gas-tight suits,

should be worn by persons who have been fully

trained. For detailed instructions on the safe-

use of the respiratory equipment please refer

to the manufacturers instructions provided with

those items. If the suit is heavily contaminated

or mechanically damaged in any way it MUST be

disposed of. MICROCHEM

Microgard Ltd accepts no liability in cases where

the product has been used inappropriately or not as

intended. The selection and use of the product are the

exclusive responsibility of the individual operator.

Product liability claims, warranties also as guarantees

*For instructions for use of the pass-thru device see page 9

SUIT FEATURES

PART CODE

OR60-T-00-801-0X-G02

OR60-T-00-802-0X-GA1

OR60-T-00-803-0X-GA1

OR60-T-00-807-0X-G02

OR60-T-00-808-0X-GA1

OR60-T-00-809-0X-GA1

SUIT MODELS INCLUDING PASS-THRU DEVICE

OR60-TA00-811-0X-G02

OR60-TA00-812-0X-GA1

OR60-TA00-813-0X-GA1

OR60-TA00-817-0X-G02

OR60-TA00-818-0X-GA1

OR60-TA00-819-0X-GA1

Set - Ansell Barrier

Gloves complete with specified Outer Gloves. GA1 Set = Ansell Barrier + Mapa 341

6000 GTS/GTB suits

instructions for use document. For all designs the

waist of the suit is supported by means of an internal

belt and they must ALWAYS be worn in combination

with compressed air breathing apparatus.

Protective Equipment ("PPE") should be fully trained

to ensure safe operation.

If you feel uncertain about the selection, use, care

and maintenance of this equipment then please

consult your work supervisor or your sales outlet.

Alternatively, please contact the Microgard Ltd

Technical Team on +44 (0) 1482 625444 or e-mail

[email protected]

GLOVES

SOCKS

BARRIER

SET

ATTACHED

are supplied with a clear PVC peel-off film material

affixed to the visor. This film should not be removed

unless contamination occurs to an extent which

results in discoloration of the film and/or distortion of

the wearers vision occurs.

WARNING - if the PVC film is removed then the visor

clarity may be affected if it is heavily contaminated by

Dichloromethane or Sulphuric Acid.

made by Microgard Ltd with respect to the product

are voided, if it is not used, serviced or maintained in

accordance with the instructions in this manual.

The determination of suitability of Microgard products

for an application is the final responsibility of the user.