Blade Removal Unit - Graef SKS 700 Manual De Instrucciones

3. Clean the carriage using a damp cloth or under running water. Use a mild
detergent in case of heavy soiling.
4. Once a month, add some drops of resin-free oil or petroleum jelly to the
carriageway.
5. Use a soft cotton wool cloth to remove excessive oil / petroleum jelly.
6. After completion of the cleaning process, put the carriage back onto the
guide profile.

Blade removal unit

CAUTION!
Sharp blade!
Proceed with caution when wiping the blade.
1. Remove the plug from the socket.
2. Pull the carriage right up to yourself.
3. Set the cutting thickness to "closed", the stop must be completely closed.
4. Turn the blade cover plate clockwise. To do so, take the blade removal
unit as a help. Put the blade removal unit onto the blade and press it
against the blade cover plate while turning the blade removal unit clock-
wise.
5. Remove the blade cover plate.
6. Put the blade removal unit onto the blade and turn it until the star knob
screw is congruently aligned with the threaded hole in the blade. Turn the
star knob screw clockwise into the thread of the blade until the stop.
7. The blade removal unit is attached to the blade.
8. Pull of the blade removal device with the blade.
9. Undo the blade from the machine.
10. Clean the inside of the blade using a damp cloth.
1 1. Remove the black scraper from the unit.
12. Clean the scraper using a damp cloth.
13. Remove the carriage ring.
42
The blade removal unit combines the possibility of easily loos-
ening the blade cover plate and safe removal of the Blade in a
practical tool.