Nevir NVR-5004 NSD Manual Del Usuario página 23

Lean the fridge backwards to an angle of approximately 60°
1.
Remove the right adjustable foot and screw.
2.
Remove the left adjustable foot, door hinge bracket and screws.
3.
Slide the door down and off the hinge pin and lift away from the
4.
fridge.
Remove the right top hinge cover carefully with a flat-head
5.
screwdriver.
Refit the top hinge cover on the left of the door.
6.
Remove the hinge pin from the top underneath of the fridge (left
7.
side).
Refit the hinge pin on the top underneath of the fridge (right side).
8.
Align the hinge pin to the hole in the top of the door and slide the
9.
door up.
Refit the adjustable foot, door hinge bracket and screws in the right
10.
side.
Refit the adjustable foot and screw on the left side.
11.
Move the fridge carefully back into the upright position.
12.
IMPORTANT: After changing the door direction check the door is
aligned horizontally and vertically and that the seals are closed on
all sides before tightening the bottom hinge. Adjust the levelling feet
to minimise operating noises caused by vibration.
Installation
23