Klipsch REFERENCE Serie El Manual Del Propietario página 2

REFERENCE SERIES
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9 . DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus
to rain or moisture.
RISKOFELECTRICSHOCK
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Thank you for your purchase of a Klipsch center channel. After reading this manual and
connecting your system, you will hear the result of over 55 years of stringent engineering and
class-leading research and development. Like all Klipsch products, your center channel features
®
Klipsch Tractrix Horn-loaded Technology—the guiding design for the first Klipschorn
developed in 1946 and for every product that has followed. Horn-loading allows your speakers
to deliver high sensitivity, low distortion, flat frequency response and wide dispersion, which
translates to unequaled power, detail and dynamics, the hallmarks of "The Klipsch Sound."
Please be sure to fill out the warranty card at the back of this manual or online at
www.klipsch.com so we are better able to serve you. Again, thank you for choosing Klipsch and
we hope that your speaker brings life to your music and movies for many years.
DONOTOPEN
UNPACKING
The easiest way to remove the speaker from its carton is to turn the open side of the box
down so that it is resting on a table or the floor, with the flaps spread out and away. Then
pull the box straight up and off. Remove any packing material from the speaker and grille,
place it back in the carton, and store in case you ever need to ship the loudspeaker. Align
the magnetic posts on the inside of the grille with the screws on the front of the speaker
and it will snap into place.
PLACEMENT
Center the speaker directly above or below your video screen. If necessary, you can place
the speaker on a floor stand in front of and below the screen that elevates it to the correct
height. Ideally, however, the speaker's front baffle should be flush with the front of the
screen. (See Figure 1.)
If the speaker is well above or below the ear height of seated listeners, you can improve
performance by angling it slightly to compensate. Included with the speaker is an adjustable
foot that you can screw into one of two threaded inserts on the bottom of the cabinet. To tilt
the speaker down, install the foot in the insert near the back of the cabinet; to tilt it up,
install the foot in the one near the front of the cabinet. After adjusting the amount of tilt,
gently snug on the supplied jamb nut to secure the foot's position. Cover any unused
threaded holes with the supplied flat, self stick rubber pads. Attach the dome shaped,
self-stick pads on the bottom of the cabinet for shelf protection. (See Figure 2.)
®
CONNECTIONS
Note: Proper connection of your speakers to your amplifier or receiver is vital to obtaining
good sound quality. Please follow these directions carefully. Sloppy connections can cause
amplifier malfunction or damage.
Figure 1
Figure 2