Training; Carabiner Installation And Use; Making A Connection - Werner A1003 Serie Para El Usuario

Protección contra caídas
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

7. AFTER A FALL: Any equipment which has been subjected
to the force of arresting a fall must be removed from service
immediately.
Warning:
Follow manufacturer's instructions for associated equipment used in
your fall protection or restraint system.
d. Training
OSHA, ANSI, and most local ordinances require that workers using
this product receive adequate training before use of this product.
These instructions and their entire contents should be a part of that

training.

II. Carabiner Installation and Use
Warning:
do not alter or intentionally misuse this equipment. Consult with
Werner Co. if using this equipment with components or subsystems
other than those described in this manual. some subsystem and
component combinations may interfere with the operation of this
equipment. Use caution when using this equipment around moving
machinery, electrical hazards, chemical hazards, and sharp edges.
Warning:
do not use this system if you are unable to tolerate the impact of
a fall arrest. Age and itness can seriously affect your ability to
withstand a fall. Pregnant women and minors must not use this
equipment.
a. Making Connections
1. Only use self-locking snap hooks and carabiners with this
equipment. Only use connectors that are suitable to each
application. Ensure all connections are compatible in size, shape
and strength. Do not use equipment that is not compatible.
Ensure all connectors are fully closed and locked.
2. Werner Co. connectors (snap
hooks and carabiners) are
designed to be used only as
speciied in each product's
user's
inappropriate
Page 8
instructions.
See
connections.
ProPer ConneCTIons

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

A100301A100303

Tabla de contenido