Manual Settings - TFA 60.2560 Serie Instrucciones De Uso

TFA_No. 60.2560_Anleitung_ 23.12.2020
TWIST – Radio-controlled alarm clock
5.3 Note on radio-controlled time
• The time is transmitted from an atomic clock near Frankfurt am Main by a DCF-77 (77.5 kHz)
frequency signal with a range of about 1,500 km. Your radio-controlled clock receives the sig-
nal, converts it and always shows the exact time. The adjustment of Daylight Saving Time and
Standard Time is also automatic.
• Make sure to avoid the vicinity of any source of interference such as computer screens, TV sets
or solid metal objects. Within concrete walls (reinforced with steel) such as basements, the
received signal is naturally weakened. In extreme cases, please place the unit close to a window
to improve reception.
• During night-time, the atmospheric interference is usually less severe. A single daily reception
is adequate to keep the accuracy deviation under 1 second.
6. Operation

6.1 Manual settings

• Press and hold the SET button for three seconds to enter the setting mode.
36
17:11 Uhr Seite 19
TWIST – Radio-controlled alarm clock
• The time starts flashing. Press HR +/- button to set the hours and MIN +/- button to set the
minutes.
• Confirm the setting with the SET button.
• The next adjustable value flashes on the display.
• Use the HR +/- or MIN +/- button to make the desired setting.
• Confirm with the SET button and go to the next setting.
• The sequence is shown as follows:
– DCF reception on/off (default: dcF ON)
– Snooze interval 5/10/15 minutes (default: Sn 5)
– Time zone -9/+9 (default: Zo 0)
– 24/12-hour format (default: 24Hr)
• Press and hold the HR +/- or MIN +/- button in the respective setting mode for quick setting. The
device will automatically quit the setting mode if no button is pressed for 20 seconds.
37