lamber PT-800-ek Manual Del Instrucciones página 24

washing cycle you chosed will be extended up to
having reached the
(thermocontrol).
G
- Take away the basket .
In order to make washing keep on, load
another basket and press pushbutton "C". The
cycle will automatically start again.
Endless cycle (maximum 15 minutes) : the door
-
being closed and the cycle put on (any cycle), keep the
button "B" pressed for 3 seconds: lamps 1 and 2 will
flash at the same time (thermocontrol excluded); the
cycle can be interrupted at any time pressing again
button "C" that will let final sequences start.
- Stand-by : the door being open, keep the button
"B" pressed for 3 seconds (lamp
lightening): if you then close the door, the machine does
not start the washing cycle keeping heating functions
still working. To start the cycle press button "C".
Self-washing cycle: with machine on, carry out the
following operations:
- Remove the overflow from the tank and wait
for the tank's emptying (for machines with
drain pump, look at the instructions in the
specific paragraph),
- Close the door of the dishwasher,
- Keep pressed the cycle button ''C'' during 3
seconds: lamp ''2'' flashes during all the length
of the 5 or 10 minutes cycle, according to the
rinse's duration fixed by default.
DURING WASHING
1) When the machine is running never change
wash time selector position.
2) Only use specific anti-frothing detergents
3) Deactivate the equipment in case of fault or
malfunction. For repairs, only address to a technical
assistance center authorised by the manufacturer and
impose the use of original spare parts.
If these conditions are not met, the equipment safety
could be jeopardised.
ACHIEVEMENTS
Any deficiency in the washing process is apparent
when dirty residuals are visible. Any halos might be
caused by an insufficient rinsing: in this case, check
that the rinsing jets are clean and there is a sufficient
pressure in the water distribution network.
In the case that residuals are present, check that:
• the washing jets are clean
• there is detergent
• the pump suction filter is clean
• the positions of the objects in the rack are correct.
RINSING ADDITIVES
To grant a perfect rinsing, a quick drying and to avoid
calcareous sediments on glasses and cups you must
add a surfactant on water (Brightner).
exact temperature
"E" will stop
Your cleansing agent supplier's will be able to suggest
the most suitable product. Your machine is equipped
with a rinse-aid dispenser. Mean concentration used
is 0,15 g/lt.
DRAIN PUMP INSTRUCTIONS
(only for machines with drain pump)
The drain pump works automatically only during
the washing cycle to discharge the exceeding water
coming from the rinsing cycle.
At the end of the working day, in order to
completely discharge the tank, it is necessary to
perform the following operations:
1. Open the door of the ware-washer;
2. Remove the overflow pipe from the tank;
3 . Afterwards push button "F" for 3 seconds.
Control lamp "E" and the cycle lamp (the last chosen)
are flashing alternatively.
The discharge will stop automatically after 5 minutes.
Control lamps will stop flashing.
The drain can be stopped at any time by pressing
again button ''F'' .
Reinstall the overflow and shut the door.
DISHES POSITIONING
For an optimum washing of the different utensils
(plates, pans, pots.....), it's necessary to take care of
the correct positioning of them.
The plates should be placed inside the rilsan coated
basket with the concave side facing upwards (as shown
in the picture).
Inside the Pizza basket with 14 sectors it's possible to
put up to 28 Pizza plates with diam.310mm.
Inside the plate basket with 3 rows it' s possible to put
up to 34 soup/plates (see picture).
For plates with diameter bigger than 310mm it's
possible to use the Pizza basket, placing the plates in
the centre.
Utensils and pans have to be placed inside the basket
by using the proper S.S. insert .
n. 28 PIZZA
max
ø 310 mm
n.34
max
ø 240 mm
24
> ø 310 mm
n. 14 PIZZA
H max
620 mm
inox