General; Preface; Product Identification; Identification Plate And Ce Mark - Sulzer Mixpac MK T1 Serie Manual Original

1. General

1.1 Preface

Dear customer,
Thank you for the trust you have in us by choosing the Sulzer
Mixpac dispenser. The Sulzer Mixpac dispenser is a state-of-
the- art device in both its design and construction. These ope-
rating instructions are intended as training documents as well
as a work reference. They should be available to the operating
personnel at all times. Please store these operating instructions
at an easily accessible location near the device. For our benefit
we are grateful for any improvement, suggestions and all cons-
tructive comments.
If you have any questions, please contact your nearest sales
point (see back of page).

1.2 Product identification

1.2.1 Name of the products
Dispenser group types:
T1*** T2*** T5***
Pneumatic dispenser categories:
(Pictures on page 3-9)
1.2.2 Manufacturer
Sulzer Mixpac Denmark A/S
Geminivej 4-6 DK-2670 Greve, Denmark
Phone +45 4360 0111
Fax +45 4369 0137
E-Mail [email protected]
1.2.3 Proof of origin
The device has been manufactured in Denmark.
1.2.4 Document
Translation from the Danish original operating instructions.
1.2.5 Relevant directives and standards
2006/42/EG. Machinery directive
■ ■
EN ISO 8573-1: Compressed air quality classes
■ ■
1.2.6 Copyright
All rights reserved. This manual may not be copied, photocopied,
reproduced, translated or converted into an electronic form or a
form that can be read by machine, either in part or as a whole,
without the previous written permission of Sulzer Mixpac Den-
mark A/S.
EN
T6*** TS4*** TS7***

1.3 Identification plate and CE mark

TM

1.4 Guarantee (Warranty)

Sulzer Mixpac provides a guarantee with the Sulzer Mixpac
pneumatic dispensers (see table 1.2.1) of 12 months from the
delivery. Parts subject to wear, abuse, and/or conditions resulting
from improper maintenance are excluded from the guarantee.
It is forbidden to make any changes to the device. The manu-
facturer must be contacted and consulted for any repairs and
maintenance to the device. All guarantee and liability claims are
forfeited if changes are made to the system without knowledge
and prior permission from the manufacturer.

1.5 Design of the operating instructions

1.5.1 Definition of terms
The following terms are used in these operating instructions:
Dispenser device: Short name for the Sulzer Mixpac
pneumatic dispenser (see table 1.2.1).
Manufacturer: Sulzer Mixpac Denmark A/S
DK-2670 Greve, Denmark
1.5.2 Symbols
Please observe the meaning of the following symbols
DANGER
Indicates dangers/hazards that may result in de-
ath or severe injuries if not observed!
WARNING
Indicates dangers/hazards that may result in
severe injuries and/or invalidity if not observed!
CAUTION
Indicates dangers/hazards that may result in
serious damage to property, economic loss or
damage to the environment if not observed!
Indicates dangers/hazards that may result from
inhaling toxic vapours/gases.
Indicates dangers/hazards that may result from
contact with caustic/corrosive chemical subs-
tances.
Indicates dangers/hazards that may result from
flying parts.
12
TM
MADE IN DENMARK