Insignia NS-HWD1636 Guia Del Usuario página 9

36" Espresso Finish Open Frame TV Stand
Step 4 Attaching the stop molding to the top
:
1 Insert two wooden dowels (15F) into the holes in the edge of the stop molding (G).
2 Insert the cam screw and dowel end of the stop molding (G) into the holes on the top (A).
Note: Make sure that the wooden dowels in the stop molding insert into the holes in the top, and that the dowel end
of the fastener remains fully inserted in the hole of the adjoining part while locking the fastener.
3 Tighten each hidden cam with a Phillips screwdriver as tight as possible.
4 Insert four wooden dowels (15F) into the holes shown in the surfaces of the top (A) and stop molding (G).
15F
15F
15F
15F
You'll need:
Phillips screwdriver
15F (6)
9
www.insigniaproducts.com